1 / 1
T Connector for Baby Playpen - 26mm — zdjęcie 1

T Connector for Baby Playpen - 26mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I broke a T connector on my Yobest Playpen so I created this part. It has a 26mm opening on all 3 sides.

Ocena
0 / 5
Polubienia
4
Pobrania
39
Wydruki
0
Wyświetlenia
147
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I broke a connector on my child's playpen so I needed to get a replacement part, but couldn't find anything online for less than $20 and I wasn't sure they would fit. So, I designed this part. It has a 26mm opening on all sides and fits rather well. It could certainly be tighter, but it allows about as much flex when pushing on the pen walls as the factory parts. This was designed specifically for the “Yobest” playpen, but this could be adapted for any playpen, if needed. 

It has been working well so I figured others might be in the same situation as me and could use this part. One thing to note is that pulling the supports out of the T connector part is a REAL pain. I ended up needing to use needle nose plyers to pull and twist it out and it caused a pretty rough inside on that part. But it just fits on a pipe, so it works fine for me. 

Tagi