1 / 4
Gummifuss Raumspartreppe Intercon Vario 3 / Rubber foot — zdjęcie 1
1 / 4

Gummifuss Raumspartreppe Intercon Vario 3 / Rubber foot

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rubber base for Intercon Vario 3 stairs / ladder. Gummifuss bzw. Gummipuffer für Leiter / Raumspartreppe.

Ocena
0 / 5
Polubienia
3
Pobrania
6
Wydruki
0
Wyświetlenia
29
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I had to shorten the Intercon Vario 3 Raumspartreppe - the stairs/ladder were too long. I cut away the last step. I after having cut them, I noticed the original rubber feet were too soft and were instantly cut-away by the sharp edges of the stair, leaving marks on the floor.

I re-designed the rubber-feet and made the lower part solid. This is my first Fusion project and it worked immediately. Thanks for z84 who helped me get into it!

I printed TPU 95A with 4 walls and an infill of 25%. I left way the anti-slip pattern on the backside, as it is (1) not needed and (2) provides a good base for printing (see pictures).

Tagi