1 / 1
Filler Filament Holder Brace with Filamnet Guide (Lightweight Remix for 2020 extrusion)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
remix of brace for 2020 extrusion profile
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of a nicer Filler Spool holder brace with filament guide to use on any printer with 2020 extrusions. Screw holes are for M5 screws (as in original), but I removed the indentations for them since I use longer screws, and so that people can change them as needed.
( I have weird t-slot profiles with oversize washers on M5 screws, so I need to make 12mm diameter indentation for the to fit)
Also I enlarged the cutouts in the middle for material saving as this brace is very rigid even at 2 0.4mm walls and 6% gyroid infill.