Fully 3D-Printed Filament Rack (Remix of BTR3D Design)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of BTR3D’s Filament Rack. Fully 3D-printed with connectors and rods, no extra materials needed. Holds 3 spools.
- Ocena
- 4,8 / 5
- Polubienia
- 198
- Pobrania
- 681
- Wydruki
- 2
- Wyświetlenia
- 2860
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
This remix is based on the elegant Filament Rack originally designed by BTR3D.
Big thanks to the original author for the simple and practical idea.
Modifications I made:
Replaced the 15 mm aluminum tube with a 3D-printed cylinder (up to 24 cm printable on my Creality V3-KE).
Added middle connector (top & bottom) parts with through-holes so the printed rods can be stacked.
Now the rack can be built entirely with 3D-printed parts only — no extra materials needed.
Each column can hold up to 3 × 1 kg spools neatly.
Just print the parts, glue them together, and you’re done.
All thanks to BTR3D for the original inspiration.