Skipping rope with 808 bearings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted better skipping rope for my kids - lets be honest, i googled for the most expensive ones and took some…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted better skipping rope for my kids - lets be honest, i googled for the most expensive ones and took some inspiration from them, and designed ones i would like to use.
Bill of materials:
-2x handles
-2x endcaps
-2x M6x20mm bolts
-2x M6 nylock nuts
-2x 808Z or non-z bearings
These use friction-fitted 808 bearings and M6 bolts with nylock nuts. I am not sure about M6 length, but about M6x20mm should do it fine.
Drill a hole through the bolt to insert a fitting, like a keyring ring through it. If you find a better way to attach a rope, please drop a comment.
When fitting the nuts, please remember to use a piece of pipe that hits/squeezes the outer ring of bearing - never put stress on the ball bearings inside the bearing. Bashing with hammer will ruin the bearing.
Post makes!
I used eSun PLA+ red for the handles, any material should really do it.
Category: Toy & Game Accessories