Jumper T12 Gimbal Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
15/06/2019This is remix from Modular Flysky Protector to Jumper T12 protector.This one is also foldable and fully…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
15/06/2019
This is remix from Modular Flysky Protector to Jumper T12 protector. This one is also foldable and fully asseambled works as switch protector.
For long time Gimbal grip there is channel at the bottom where the rubber band should go. This can be done easier by printing and using object Rubber_Attach_Object.stl.
To remove printing leftovers in hole where gimbal sticks to I used pile. I printed it only with bottom support. I set three wall parameter for strenght and 60% infill.
I only published one side of Gimbal_Protector.stl and SwitchProtector.stl. To have both left and right side you have to multiply and mirror it in slicer before printing.
There are also few variants of rings to choose from...
How I Designed This
Adding rubber band
Assembly
Attach on Jumper T12
Category: R/C Vehicles