Jumper T12 Upper Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
15/06/2019Added antenna dummy plug for bottom locking position of protector.Made low and high variant.Printed with…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
15/06/2019
Added antenna dummy plug for bottom locking position of protector. Made low and high variant.
Printed with TPU.
18/05/2019
This object protects upper switches and antenna of my Jumper T12 transmitter during transport and while I am using it at home sitting on chair with hand supports.
I printed it with support and brim parameter.
After clean up I made sure that I removed all support from attaching gaps. I also sanded edge of attaching part....
There are three objects: JumperT12_Antenna_andGHswitchProtector.stl (protector itself) Bending_Part.stl (shape object for after print bending) SnappingTest.stl (test object for snaping on rod of transmitter)
I dipped ends of protector into hot water to bend them into requiered shape.
How I Designed This
Printing timelapse
Cleaning support and brim
Bending with hot water and bending part
Attaching and preview
Dummy plug for bottom position locking of protector
Category: R/C Vehicles