1 / 2
Makita battery adapter for Cocraft GT18 string trimmer — zdjęcie 1
1 / 2

Makita battery adapter for Cocraft GT18 string trimmer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a "easy to reverse" mod for cocraft GT18 string trimmer, sold in Clas ohlson stores. GPlatek has created a…

Ocena
0 / 5
Polubienia
5
Pobrania
26
Wydruki
0
Wyświetlenia
965
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a "easy to reverse" mod for cocraft GT18 string trimmer, sold in Clas ohlson stores. GPlatek has created a great mount for makita batteries, there is absolutely zero play in that mount. My mount is attached to that using M4 bolts and nylock nuts.

Just desolder the original battery connector and use the connector from mojo_replica. I used old PSU metal chassis, that is exactly 0.8mm.

Installation:

-open the screws of the handle, remove old battery mount.

-attach new battery mount and route the wires through.

-solder the wires to makita battery connector.

I used simple PLA for this, 60% infill. Seems to be just enough.

Trimmer in action : https://youtu.be/sVnqwtoVKY0

update 14/9/2018. After a dry summer i got to use the trimmer on our lawn 5 or more times. We have quite large lawn, about 6000m2 of cut grass area where i used this. The slices of metal cut from PSU chassis didnt get warm at all although i ran a battery almost empty on one run. Everything works really fine.

Category: Outdoor & Garden

Tagi