Compliant Broom Wall Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compliant sprint wall hanger for handles with ~21mm diameter
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Taken from https://www.thingiverse.com/thing:6326244
Designed for hanging a 21mm bar on the wall.
No supports or moving parts.
The compliant spring is designed with a profile that ensures the broom is unlikely to fall, while still maintaining flexibility to prevent easy breakage.
Additionally, it comes with two screw holes intended for countersink screws. However, I've found that using just one screw is sufficient for ample support when attaching it to a wooden beam.
Printed in PLA+ and PETG. Affixed to wall using nano tape.
Print Settings
- Printer brand: Anycubic
- Printer: Kobra 2 Neo
- Rafts: No
- Supports: No
- Resolution: 0.2 or 0.3
- Infill: 25%
- Notes: At least 3 perimeters.
It should be printed with the pointy side of the holes UP