Skeletal Hand with Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skeletal hand from a CT scan with base
- Ocena
- 5 / 5
- Polubienia
- 120
- Pobrania
- 470
- Wydruki
- 3
- Wyświetlenia
- 1371
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Noncommercial
Update 12/24/2025: I uploaded the exported STLs for the hand and base since Prusaslicer was throwing an error with the generic 3mf.
This is a remix of the bones of the right hand and distal ulna and radius from “My Segmenter's” full skeleton on the NIH3D Print Exchange under CCBY license. I remeshed and solidified the model to fuse the bones to print as a single model. I created the base in Blender and cut the combined model in Bambu Slicer, adding connectors.
I printed this with 0.20 mm layers, 2 walls, 15% infill, tree supports at 30 degrees for the hand (2 top interface layers, top interface spacing = 0, top z distance = 0.20). I used Sunla matte PLA in bone white and Panchroma charcoal black. Be careful removing supports. I probably should have made the connectors a little bigger, but if you use a fast-drying glue it will set fast.
The model is life size and anatomically accurate since it is derived from a CT scan, although the original model was very low poly. This could be used as an anatomical reference or just as a cool Halloween decoration.
Bambu3mf on Makerworld.