Ferret Trinket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I came across u/lumpytuna's laser-cut ferret pendant on Reddit and thought, "I could print that!" So I did. Just in…
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 167
- Wydruki
- 0
- Wyświetlenia
- 1188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I came across u/lumpytuna's laser-cut ferret pendant on Reddit and thought, "I could print that!" So I did.
Just in time for holiday decor and gift giving season.
(With permission) I made this version by re-tracing the image in u/lumpytuna's post as a vector, then extruded the two colors proportionally for printing. For the best results at any scale, I ended up with three slightly different versions with varying amounts of detail in the face. All are roughly 100mm tall by default.
- Thesimple version (Simple_Ferret.stl) is ideal for printing at any scale, big or small, and recommended for most cases.
- Themedium version (Medium_Ferret.stl) is similar to the previous, but with more geometry in the eyes and mouth.
- Thedetailed version (Detailed_Ferret.stl) is closest to the original laser-cut design, but unless you have a very small nozzle (<0.3) OR intend to scale it up greater than 150%, the face may turn messy.
u/lumpytuna's original ferret pendant necklace can be found here: https://obscenerie.com/collections/the-menagerie/products/ferret-pendant
Print Settings
Supports:
No
Notes:
Regardless of which version you print, choose a smaller-than-usual extrusion width for your nozzle if you can. This will allow you to resolve more detail in the face. Smaller layer heights will also reduce unsightly blobs or banding on the top layers.
For dual-color printing (like seen above) on a mono-color printer, pause your print during any of the last few layers and swap filaments. Alternatively, you may be able to feed in a new color towards the end of the print without pausing.Category: Animals