BMW R1150GS(A) thermometer holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for the common thermometer - both rectangle and round one with moisture as well.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 410
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Holder for the most common thermometers you can find on Aliexpress and similar web-shops - rectangle with sensor on wire and round one with moisture indicator.
I created three versions:
- Round one - 42 mm dia, 14 mm deep - created as first one, but sensor inside was affected from the heat coming up from engine and oil cooler - readings are bit off, around 2 to 10 degrees.
- Rectangle on the side - 46 x 27 x 13,7 mm - wanted to keep the location on the side, but in my opinion it is not as nice as the round one.
- Rectangle under gauges - visible, yet hidden - in my opinion the best one. There is a “hook” at the end of the holder, which hooks the end of the cockpit, just for a added security.
I would recommend print it at least in PETG or ASA (on pictures, rectangle on side is black PETG, under gauges is Prusament galaxy black ASA.
Installation of everything is made with double-sided tape, ideally 3M one 1 mm thick.
Location of the sensor on the wire is shown one one of the photos, the far from engine the better, but it should not be exposed directly to wind and/or sun.