1 / 2
SV08 Rear Exhaust Fan Trim For Insulation — zdjęcie 1
1 / 2

SV08 Rear Exhaust Fan Trim For Insulation

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A little trim I designed to hide the edge of DIY insulation added to an official Sovol SV08 enclosure.

Ocena
0 / 5
Polubienia
4
Pobrania
13
Wydruki
0
Wyświetlenia
92
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

I was insulating my print chamber (official SV08 enclosure), but the edge around the exhaust fan ended up looking really ugly. So, what I can't make work with precision, I can at least cover up with printing. I think it looks pretty nice. 

The model is designed to print face down, the overhang is pretty steep but I got it to print nicely from ASA-CF by enabling cooling fan from layer 2 onwards. The model also grips onto the same threads that grip into the enclosure wall, so press the bezel against the threaded boss when screwing in the fan screws to make sure it actually sits flush. 

The uploaded STEP and STL files are intended for 3mm thick insulation, if you need any other thickness download the f3d file and increase the depth of the first extrusion to be your insulation thickness + 1. The model uses a few slightly bad practice hacks, but is parametric enough for this to work. 

Tagi