1 / 6
Not just another Punaise - Drawing Pin - Push Pin - Thumbtacks enclosure - LEGO compatible — zdjęcie 1
1 / 6

Not just another Punaise - Drawing Pin - Push Pin - Thumbtacks enclosure - LEGO compatible

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A clever little enclosure for a standard push pin (drawing pin / thumbtack). Remix, design and enjoy!

Ocena
0 / 5
Polubienia
2
Pobrania
3
Wydruki
1
Wyświetlenia
113
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Share Alike

This is not just another push pin holder – it’s a LEGO® compatible block enclosure that you can integrate into your own designs, giving you endless possibilities. Perfect for use with standard push pins, drawing pins, or thumbtacks.

🔹 How it works:

Insert any standard push pin / drawing pin / thumbtack into the block.
The pin snaps firmly into place without glue.

You can even customize the top to be LEGO® compatible, so you can build directly onto it.

🔹 What you can do with it:

Mount LEGO® Mecha, minifigures, or other builds on a corkboard.
Create modular wall displays for models or decorations.
Mix notes, photos, and LEGO® builds into a playful pinboard setup.

Add the block to your own 3D printed designs to invent new uses.

🔹 Printing tips:

Recommended materials: PLA or PETG.
0.2 mm layer height works well.

⚠ Use a sturdy corkboard (cork or foam pinboard) for the best results. Not designed for heavy loads.

________________________________________________________________________________________________________________________________

Dit is niet zomaar een punaisehouder – het is een blok dat je kan gebruiken in je eigen ontwerpen zodat het je talloze mogelijkheden geeft.

🔹 Zo werkt het:

Plaats een standaard punaise in het blokje.
Het klikt stevig vast zonder lijm.

Pas het ontwerp aan met bijvoorbeeld bovenkant die LEGO® compatibel is zodat je er direct op kunt bouwen.

🔹 Wat kun je ermee doen:

Mecha-figuren, minifigs of andere LEGO® creaties ophangen aan een prikbord.
Modulair een wanddisplay maken.
Notities, foto’s en bouwsels combineren tot een speelse decoratie.

Het blokje toevoegen aan je eigen ontwerpen en er iets nieuws mee bedenken.

🔹 Printadvies:

PLA of PETG aanbevolen
0,2 mm laaghoogte werkt prima.

⚠ Gebruik een stevig prikbord (kurk of foam) voor het beste resultaat. Niet bedoeld voor zware constructies.

Tagi