1 / 4
AutoDrive 5 Gallon Bucket Trolley Shim - Walmart — zdjęcie 1
1 / 4

AutoDrive 5 Gallon Bucket Trolley Shim - Walmart

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I designed a shim to better secure a 5 gallon bucket when mounting to AutoDrive 5 Gallon Bucket Trolley

Ocena
0 / 5
Polubienia
2
Pobrania
14
Wydruki
0
Wyświetlenia
173
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I designed a shim to better secure a 5 gallon bucket when mounting to AutoDrive 5 Gallon Bucket Trolley that I purchased at Walmart.  The bucket trolley has 3 butterfly wing nut screws to secure the bucket. I was not happy with how much the bucket deflected when tightening the screws.  So, I designed a shim block to help even the load when tightening the screws. 

The fit is bucket dependent.  The bucket shown here is an older bucket from Ace Hardware with thick plastic walls.  I have same setup for Home Depot bucket that appears have thinner walls.  This caused a bit more deflection in the bucket when securing it. But, I am happy with the overall results.

The deflection does not really show up in this photo.This photo is one of my final prototypes before I added chamfers to the part.

I have included the Freecad model, so if anyone wants to remix, please feel free.  

For printing, I upped the perimeters to 6 which basically made solid walls on either side of the U channel.