FLEXI CAT - Articulated Print-In-Place Low-Poly Sitting Cat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A low poly cat with a long, highly flexible tail
- Ocena
- 0 / 5
- Polubienia
- 38
- Wydruki
- 2
- Wyświetlenia
- 921
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Standard Digital File License
A small low poly cat with a long, highly flexible tail. Make sure to read the suggested print settings and wiggle the joints after printing to ensure best results!
Suggested settings
- 3 walls
- 15% infill
- Mouse ear brim (needed!)
- Supports for chin (set angle to 20%)
- 20 layer tall skirt (gives tail a chance to dry between layers)
- Print at any size from 75mm tall for best results
Size
- Print at any size from 75mm tall for best results
- By default it is around small enough to sit in your hand
License
✖ | No sharing or redistributing in any way of the 3D files or derivatives
✖ | No remixing
✖ | Non-commercial Use (only for personal use)
If you share anywhere, you must give me credit. Thank you!
If you're interested in a commercial-use license, please contact me via the contact page.