1 / 4
Parkside Cordless Vac 20V - PHSSA 20-Li D2 - Accessory Storage for wall mounting. — zdjęcie 1
1 / 4

Parkside Cordless Vac 20V - PHSSA 20-Li D2 - Accessory Storage for wall mounting.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Keep your accessories handy but out of the way with this wall mount, especially if you don't use the extension tube much

Ocena
5 / 5
Polubienia
2
Pobrania
22
Wydruki
1
Wyświetlenia
143
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I mostly use the crevice tool with my vac, so I wanted to put the other accessories away somewhere without them cluttering up a load of shelf space. Quick bit of design, and out popped a peg which accepts the narrow end of the extension with everything mounted on it. If you use the extension tube with the tools in their holster mounted on it, then unfortunately the holster will be upside down when placed on the wall, but I don't use it often enouigh for that to be an issue and I just remove the holster and tools when I need the extension.

I printed it as fast as I could, as I wanted to fit it straight away! With 0.4mm nozzle, I used 0.28mm layers and only 4 tops/bottoms, 20% lines infill, no adhesion but you DO need to use support (e.g. 25% zigzag “touching buildplate” worked well for me). Snapped off very cleanly as you can see in the photo. Everything else standard settings. Use thinner layers if you want it a bit more refined but mine came out fine. I printed in Elegoo PLA+ so pretty much anything will do for this.

Hardware - just two #6 or #8 screws and suitable wall plugs, I used #8 screws 1.5" long and that's plenty sturdy for these lightweight accessories. 

Putting it up didn't crack the wall, hehehehe, that crack has been there for decades!

You don't need a fancy mount for the vac itself, there's a keyhole on the bottom which fits a #8 screw nicely so pop that in the wall and hang the vac on it. I wanted to put it next to the tools but the vac is just too fat to go there as the garage door would clout it so it had to be hung out of view of the photo.

Please Like this model if you find it useful.

If you REALLY like it, https://www.buymeacoffee.com/gigabeast :o)