Meshes & Grilles ~ High Strength ~ Printable ~ FreeCAD Parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Square mesh pattern optimised for strength and printability
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
FDM printed meshes….
You know how it goes, choose two :
- Simple design
- High strength per weight
- Prints quickly & reliably
Basic square meshes are easy to design, however printing them isn't great when each little square gets done individually. Lots of retractions, stringing, and on the first layer many possibilities for things to come unstuck. Not to mention the reduction of strength caused by all the discontinuities.
Another option is to print alternate layers orthogonally. It prints fast and easily with much fewer retractions. However it's not a strong, fully dense structure as all the gaps are bridged
My method prints in zigzags, making it quite fast and also with few retractions. Moreover, it avoids bridging, so the ‘wires’ are properly dense.
For strength, alternate layers switch the orientation of the zigzags (see images).
The drawback is that the design isn't so simple… but I have done most of the work!
FreeCAD users can generate bespoke grilles according to requirements, using the included parametric source model. Find the spreadsheet in the model tree and edit the blue cells according to the diagram (see images).

The other drawback is that the model is very slow to regenerate. Paradoxically, to guide the slicer to make the simple toolpath we want, the model becomes very complex with lots of detailed features.
Therefore, before editing any parameters, choose the “Skip recomputes” option so that it doesn't make a lengthy recompute after every individual change.
After changing all the needed parameters do a manual recompute. Depending on the number of mesh lines and layers, this can take literally hours on an older computer.
And unfortunately there's a glitch in the model which I don't know the reaon for, but basically the sketch named Mesh_Sketch will usually fail at regeneration after parameters have been changed. This is immediate, no waiting around. You can see the red x appear in the tree indicating the problem. Fortunately the solution is just to go into that sketch and try dragging a point or two, which won't do anything as they're constrained. But on exiting the sketch the rebuild can normally then continue.