1 / 5
Mars Rover Roomba Ride along Sojourner iRobot Roomba 692 — zdjęcie 1
1 / 5

Mars Rover Roomba Ride along Sojourner iRobot Roomba 692

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A little model of the Martian Rover Sojourner to put on top of your Roomba as it drives around cleaning

Ocena
0 / 5
Polubienia
4
Pobrania
8
Wydruki
1
Wyświetlenia
195
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

 note: printing of parts and a small file rework are still in progress will add the files and have new pictures ASAP but needed to post to make sure I made it into the competition
 

Inspired by Randall Monroe’s XKCD about Mars Rovers I set out to make a Sojourner mod for Roombas, unfortunately, I bit off a little bit more than I could chew during the Prusa Roomba mod contest duration so I only have a ride along model that can sit on top of your Roomba

For 3-D printing, I recommend scaling all parts to 300% minimum and using the simple wheels. If you would like to make a bigger Roomba, you may use the other wheel model, (unfortunately, some of the finer features have issues at smaller scales). 
The model in the pictures was printed at 300% scale using the simple wheels.

You need six wheels for a full rover, one set of the wheel arms for the left side () and another set for the right side (), one solar panel, one body and one antenna.

I’ve included the fusion360 file if you would like to make any changes to the model.

Happy printing!

The xkcd in question:
https://xkcd.com/2433/ 
https://www.explainxkcd.com/wiki/index.php/2433:_Mars_Rovers

The project I wanted to use is a starting point in modeling my roomba into a rover:
https://hackaday.com/2011/06/22/converting-a-roomba-into-a-mars-rover/
http://www.youtube.com/watch?v=jNgpl1TL4xg&w=470 

Tagi