1 / 4
Adventure Force Maxim Pro Drop-In Dual-Stage Trigger — zdjęcie 1
1 / 4

Adventure Force Maxim Pro Drop-In Dual-Stage Trigger

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A drop-in mechanism for the Adventure Force Maxim Pro that converts it from back-grip rev to a dual-stage trigger

Ocena
5 / 5
Polubienia
31
Pobrania
102
Wydruki
3
Wyświetlenia
521
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution

This is a drop-in, dual-stage trigger mechanism for the Adventure Force (Dart Zone) Maxim Pro. This requires no additional hardware

Includes:

  • Dual-Stage Button Linkage (Supports required. May also require a bit of filing on the slope)

  • Back-Strap Rev Switch Cover

  • Safety Delete Cover

Steps:

  • Remove all parts related to the trigger, safety, and rev mechanisms (This will require temporarily unscrewing the rev switch, as one of the screws is hidden underneath it)

  • Remove the screw holding on the right side black grip plate

  • Install the Back-Strap Rev Switch Cover

  • Screw it into place with the screw you just removed, securing it and the right side black grip plate in place

  • Install the Dual-Stage Button Linkage

  • Insert the spring from the trigger lock onto the linkage

  • Reinstall the trigger and it's mechanism (This may require pushing the linkage down a bit while installing the trigger. It should all click together)

  • Insert the Safety Delete Cover at the the bottom of the grip (The smaller side should friction fit into the right side of the grip)

Please Note:

  • These parts were made/modified in Blender, and, therefore, may have minor imperfections

Edits:

  • September 22nd, 2025: Updated Dual-Stage Button Linkage to V2 (Redesigned from scratch for better fitment, increased sturdiness, and to fix an issue with the slope)

Tagi