'Mini Heater' Stand w/ Heat Deflector - Strong & Sturdy - Modular Mounting - Centauri Carbon Bambu Lab X1C Chamber Heater PTC Heater
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This stand allows the heater to face up or down, provides a snug sturdy base. This can also be used in any 3D Printer.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 1244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
The stand lets you install the heater to either blow upward or blow downward in your machine.
Deflector only sits on top of the heater as its facing upward blowing heat towards the top glass. Nothing fancy.
The tolerances were perfected for my scenario and my heater, your Mini Heater might be slightly different. I also removed the metal stand a long time ago from my heater - I have not tested this with the metal stand installed
Printing as shown in the above photo's is highly recommended. Add a brim if you'd like. I've not had any issues with overhangs or warping at all. Printed on X1C and Centauri Carbon. I've tested ABS, PA6 and PAHT.
Supports: Auto Tree's, 40 threshold angle, make sure build plate only, support critical regions and remove small overhangs are ALL TURNED OFF.
