Globe and Star Finial - Two Versions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A decorative topper for a metal bracket I am making.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Public Domain
What is a finial?
Finial : A sculptured ornament, often in the shape of a leaf or flower, at the top of a gable, pinnacle, or similar structure.
Note: This will be one of several finial designs I am making.
This finial is designed to be mounted on the end of a ¼"-20 thread (or M6-1), and to fit over a nut on that thread (picture a bolt projecting upward, held on by a nut - the finial screws onto the bolt end ). The finial has an internal cylindrical opening which needs to be tapped to fit the thread you are using.
Print Instructions
Since I will be using this outdoors, I printed in PETG. Use the gcode or 3mf files provided to print in PETG. Otherwise :
- perimeters = 4
- 5% rectilinear infill
- supports required for Version 1
- no supports required for Version 2 (not tested)
Note : I generated 3mf and gcode files for Version 2, but did not actually print this version. However, I believe it should print well without supports.
CAD
The OnShape 3D CAD files for this are here :