1 / 22
Fossil Replica of Restored Triceratops Skull — zdjęcie 1
1 / 22

Fossil Replica of Restored Triceratops Skull

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Anatomically correct life size triceratops skull with fully modeled exterior and interior plus 3D surface level detail.

Ocena
0 / 5
Polubienia
122
Wydruki
1
Wyświetlenia
5285
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Standard Digital File License

Description:

All currently living species alive on planet Earth today total only less than 1% all of the species that have ever lived on this planet alone. And less than 1% of dinosaur species were even fossilized for us humans to discover. We can only imagine what other species we don’t know about that have lived on Earth, but the actual remnants of triceratops’s have been discovered. Entirely based on real fossils, this skull appears restored so that structural and textural indication of fossilization such as warps, cracks, and large areas of rock are not present. Replicated with anatomical accuracy, the shape of this skull is more so identical to how it would appear as the creature was alive millions of years ago. 

While not based on any specific specimen, the model of this triceratops skull was created with the use of various references including photos, videos, diagrams, and scans of real triceratops fossils. Virtually all other readily available 3D models of triceratops fossils are apparently exaggerated, omit several details, and are extremely low poly when compared. This triceratops fossil 3D model is the most complete, anatomically correct, and realistic one that I’m aware of. Each section of the skull was sculpted individually and includes a fully modeled 360 degrees exterior and interior. I created this triceratops skull fully from scratch and sculpted every single vertex in Blender. With the use of a 3D mouse, I added the finest physical geometric details all the way down to the 3D texture of the bone. So even the textures are 3D and will be present in a life size 3D printed model.

I personally found that purchasing low cost filament, when possible, saved me a lot of money. The filament I got from online was less than half the cost of Prusament and it worked just as well. If you already have many of the supplies and tools, that can significantly lower the projected cost of completing this project. Obviously depending on various factors, this project can generally cost more or less around $500 to $750 to complete. I consider this worth it since well-made replicas can cost many thousands of dollars ranging up to around a hundred thousand dollars. I encourage you to check the prices of other high quality fossil replicas online. Not to mention, they are usually made to order, so you still have to wait months, and they are even made using inferior materials. Other fossil replicas are often made with the use of plaster and the texture of the plaster tends to be noticeable in the finished product. I honestly find 3D printing to be less ideal in most situations, but for this project specifically I think it is perfect and it’s an ideal use case for 3D printing. In fact, most fossils of dinosaurs are found incomplete and many of the missing pieces are often 3D printed even in the most professional settings like in universities and museums.

Instructions:

Print bed volume should simply be as big as possible to decrease the total amount of pieces. I use a single 3D printer with a build volume of (x/y) 250mm/210mm (z) 210mm. This is the same build volume as the Prusa MK3S+ which I use. If you have an extra Prusa XL or other large 3D printer, please send me one. If you are going to purchase any new 3D printer from Prusa3D, please at least consider using my referral code so we can both get prusameter points. My referral code for Prusa3D is @cryonics01_3407678. Note that the triceratops skull is not exactly symmetrical so don’t mirror any pieces. Although if you did mirror half of the skull, it would still look 99% the same as if you didn’t and nobody would know.

Filament used for this project can be anything, but I recommend PETG for durability and temperature resistance. I don’t recommend using PLA or even High Flow PETG because they are not as durable as regular PETG. Generic PETG presets are fine, and the print speed can often be increased by considerable amounts without any change in print quality. About 30kg of filament will be needed to 3D print the life size Triceratops skull at full scale. Black filament color is ideal so hard to reach places that aren’t fully painted won’t be noticeable no matter what color paint is used. Nozzle diameter can be anything, but I used a 0.6mm nozzle and the layer height I used was 0.4 with some variability. I printed with two perimeters and minimal infill, but with greater infill at top and bottom to increase strength where parts are joined. Make sure to use a satin or textured sheet if printing with PETG since the PETG adheres too well to smooth sheets and will break the PEI coating on smooth sheets. Keep in mind printing many large objects in quick succession for extended periods of time can quickly introduce the need for troubleshooting, maintenance, and repairs.

JB weld is great for gluing the pieces together. JB weld is stronger than the PETG and it adheres well to the PETG so the structure of the printed part would likely break before the glue fails. Each piece I printed had one or two attachment points where the glue was applied so the glue remained thicker within those spaces. The attachment points were simply holes about the size of a quarter and about a fourth of an inch deep where the glue wouldn’t be squished flat. JB weld takes hours to cure, so super glue can also be used to quickly hold the pieces together and ensure the parts don’t slide around in the meantime. In some areas I used a soldering iron to melt the PETG parts together for additional reinforcement and instead of using super glue.

I spray painted the entire skull with sandable filler primer. Then I filled in large gaps between pieces with filler and smaller gaps with putty. I sanded it mostly using various electric sanding tools like a random orbit sander and rotary tool, but in some areas, I used a sandpaper sponge and sanded by hand. Make sure to use sufficient PPE and wear a mask. After sanding I washed it with water and let it dry before spraying with more primer. You can use any color paint you want, but I recommend using umber and sienna colors with wet washed black to darken indents and crevasses. Once painted, any visible imperfections can be fixed using modeling paste. Finally paint the skull with a protective coating like a matte or satin polyurethane. 

Displaying the finished triceratops skull is totally up to you. The jaw is not attached to the rest of the skull and can displayed open or closed to any extent. If opting to hang it from the ceiling, I recommend using adjustable suspension wires around 1.5mm thick and DIY straps. Alternatively, you could use thicker wires and lifting slings for additional strength. Another great display option would be to make a floor mount that supports the triceratops skull from underneath. Finally include some nice area lights and you will have transformed your home into a stunning museum gallery with an absolutely amazing multimillion dollar fossil replica of a triceratops that lived millions of years ago. That’s one dollar for each year since the time dinosaurs roamed the Earth. 

Tagi