1 / 5
Centauri carbon Aux fan muffler, works with HEPA filter — zdjęcie 1
1 / 5

Centauri carbon Aux fan muffler, works with HEPA filter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3d printed muffler for auxliery fan. To muffle the sound. It fits nicely with hepa filter

Ocena
4 / 5
Polubienia
131
Pobrania
459
Wydruki
3
Wyświetlenia
3578
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

3D Printed Aux Muffler

There are many designs for muffling the sound from the auxiliary fan. However, none of them fit with the HEPA filter that almost everyone is using. So, I designed one that fits properly.

Keep in mind that you cannot reduce the fan’s loudness directly, since that is not possible. What you can do is muffle the sound by altering the frequencies it produces. I designed this muffler to bounce the sound inside, shifting those frequencies. For this to work, the part needs to be heavy and bulky. That’s why I set the print infill to 20% and chose the cubic infill pattern.
Interestingly, this design also reduces the volume by about 3–5 dB.

You can place foam between the intake and the muffler, but in my tests it didn’t seem to make any difference (see the video for details).
 

Due to a misalignment the muffler will be little bit hanging out from the side. Completely my mistake.

Heres a fix:

https://www.printables.com/model/1428124-centauri-carbon-fan-muffler-for-hepa-filter-mod-be
 

Printing instructions:

Infill: ~10%–20%
3 layers
No supports required

Foam insert dimensions:
Width: 73.50 mm
Length: 92.00 mm
Height: 9.20 mm

You will also need 10.00 mm × 3.00 mm magnets — the same type that is used on the HEPA filter.

Be aware that this is my first ever post. I may made some mistakes.

Tagi