Handheld Back and Muscle Massager
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A one piece handheld back and muscle massager. No moving parts. Easy to use.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Public Domain
A one piece handheld back and muscle massager. No moving parts.
I'm not sure how original this is. I did own one that was made of wood. I lost the original wood one and reconstructed this from memory. As far as I know this is it's first time as a digital file.
Print structural or with a decent amount of walls. Print with supports. I recommend organic/tree supports. I also recommend moving the model up in the air. You can right click the model and add a part to it. Maybe cylinder. Scale the new part's x and y-axis to as small as possible. Then select the back massager and add 18 or 19 mm to its z position. This will lift up your print, but the slicer won't be able to print the cylinder because it is too thin. Second picture is printed “in the air”. When you are done printing remove supports and buff out the scar with sandpaper or a corse nail buffer.