PARAMETRIC Edges for baseboards "Hamburger Leiste" 80mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric edges for connecting baseboards of the type "Hamburger Leiste" with a thickness of 80mm.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When you are mounting baseboards, instead of being very skilled and cutting the baseboards at very specific angles, you can also use prefabricated edges and just add them on top of the baseboards.
Only problem is that they are only available at 90 degree angles. So if your house uses any other angle, you can't use them.
So I designed a replacement in Onshape and made it parametric so you can print them just like you need them.
To make your own models, just visit the model at OnShape (no account necessary): https://cad.onshape.com/documents/6ba6803f911c6d102325a94c/w/eea4d695b616e6cd5c959db1/e/c16699687567a391605c5ecc
On the left side on the top there's an area called “Configurations”, there you can change the parameters of the model.
You can print the edges without supports by placing them on the top side.