Subaru Legacy middle console sliding cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Subaru Legacy middle console sliding cover
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 186
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Subaru Legacy (2004) middle console sliding cover.
Printed with creality k1 max with pretty much stock presets for filaments
Those little sticks that go under the mat was printed with Polymaker polyterra charcoal black PLA. you will need about 40 of these. I did print these with 0.16 layerheight and 150ms/s. No sanding needed if you go bit slowere.
Handle was done with the same PLA and 100% infill. Used screws to attach it to the mat.
For the mat i used Copymaster3d TPU 95A black. Again with stock presets it took around 3 hours to print. Painting it after it was done was optional.