1 / 3
Shelf for Oil Bottles / Regal für Ölflaschen — zdjęcie 1
1 / 3

Shelf for Oil Bottles / Regal für Ölflaschen

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Shelf for up to five 250 ml oil bottles (48 x 48 mm) / Regal für bis zu fünf 250 ml Ölflaschen (48x48 mm)

Ocena
0 / 5
Polubienia
4
Pobrania
11
Wydruki
0
Wyświetlenia
51
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

I had accumulated quite a few oil bottles that I couldn't find a suitable place for.

So I quickly constructed a small shelf for the bottles that fits up to five 250ml bottles measuring 48 x 48 mm.

When placed diagonally across the print bed in the slicer, its outer dimensions of 245 x 54 mm just fit on a 225 x 225 print bed, like on my Elegoo Neptune 4 Pro.

Print with material of your choice, I used Elegoo PLA, beige.  For stability use 4 or 5 wall lines, no support needed, print time approx. 2 hours.

The shelf is attached with two countersunk screws (horizontal distance 160 mm).

--------------------

Es hatten sich bei mir einige Ölflaschen angesammelt für die ich keinen richtigen Platz finden konnte.

Daher habe ich schnell ein kleines Regal für die Flaschen konstruiert, in das bis zu fünf 250ml Flaschen mit den Abmessungen 48 x 48 mm passen. 

Wenn im Slicer diagonal auf der Druckfläche plaziert, passt es mit den Außenmaßen von 245 x 54 mm gerade so auf ein 225 x 225 Druckbett, wie bei meinem Elegoo Neptune 4 Pro.

Druck mit beliebigem Filament, ich habe Elegoo PLA in beige verwendet. Aus Stabilitätsgründen mit 4 oder 5 Wandlinien drucken, kein Support erforderlich, Druckzeit ca. 2 Std.

Das Regal wird mit 2 Senkkopfschrauben (Abstand 160 mm) befestigt.

Tagi