1 / 2
Breacher longer muzzle (to match tube cap length)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Longer muzzle with "vent" holes for the Sillybutts Breacher
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 305
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (17)Powiązane
This is an extended muzzle part for the Sillybutts breacher. If you are using the one flush tube magazine cap on the original file it sticks past it. So I made this part extended to cover it and i added some "vent" holes for a little bit of style. I would recommend printing with supports and the original Breacher print settings. I use support interface material on mine, it gives a clean inner surface but regular supports should do fine.