Shoomimi Brain Charm / Keychain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Unofficial fan model of Shoomimi's brain as a charm/keychain
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Unofficial fan model of Shoomimi's brain as a charm/keychain
https://www.twitch.tv/shoomimi https://twitter.com/Shoomimishoom
Print Settings
- Printed in a Pink, Red, and Black PLA, solid.
- (Optional) Printed facedown on a holographic plate. Printing facedown will also always be smoother regardless of plate (unless textured) If effects plate, bump normal PEI Hotplate temp ups by 10c if it doesn't stick.
- 0.4mm nozzle, 0.2 layer height, initial layer height 0.12.
- First layer line width 0.25, other layers 0.42. This is important to fill in details
- Wall gen arachne, precise walls, etc, to fill in more gaps
- (Optional) I had success on an effects plate using 0.2 elephants foot compensation
Import both models into orcaslicer / bambuslicer / elegoo slicer as an assembly, set filament types to each object, and make sure they are aligned. Then if you want to print it face down, rotate it face down onto the plate.
If you don't have an AMS/MMS, it is only 4-6 filament swaps between cyan and white, depending on layer height.
Filaments used:
- Elegoo Pink PLA
- Elegoo Black PLA
- Polymaker Polylite Wine Red PLA