Nocturne USB camera mount for Prusa CORE One
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Corner magnetic mount for the Nocturne USB Optical/IR camera based on CORE One Buddy Cam case.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 352
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Nocturne USB magnetic camera mount took design influence from the @Prusa Prusa Buddy Cam as well as the ESP32 camera case design from @KeepTheBox, but was designed from scratch in FreeCAD.
The camera mounts magnetically in the upper left inside corner of the CORE One. Suggest following the Prusa CORE One camera installation instructions as far as running the USB cable. Mine is connected to a Raspberry Pi running uStremer software that allows me to stream from the CORE One. I also grab images that are sent to PrusaConnect using the script from _KaszpiR_
There are variables in the FreeCAD file to change size of magnets. The build uses 4 M2x8 bolts.
Print both parts in the orientation provided. Use supports on the base (for the square area that hold the camera PCB - I used organic supports as they are easy to remove).