1 / 6
PTFE tube holder/parking rack for Prusa CORE One — zdjęcie 1
1 / 6

PTFE tube holder/parking rack for Prusa CORE One

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Parking rack for loose PTFE tubes, filament plugs, etc. Attaches to the Prusa CORE One via Nylon Rivets and magnets.

Ocena
5 / 5
Polubienia
14
Pobrania
21
Wydruki
2
Wyświetlenia
445
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Public Domain

This is a holder for 5 PTFE tubes or other items, such as filament plugs or tube adaptors. Especially useful if you are printing via the MMU and directly out of Dryboxes and want to organize loose PTFE tubes.

There are 2 versions:

  1. Large, 6mm diameter: Fits the large PTFE tubes, filament plugs, my 4mm tube connectors for the polydryer box, or the smaller PTFE tubes (loosely, see photo).
  2. Small, 4mm diameter: Fits the smaller PTFE tubes used by the MMU3.

It connects to the back of the CORE One, between two nylon rivet holes. The rivets keep it in place and 4 magnets (6x2mm) hold it against the printer frame.

Parts & Tools

  • 4x 6mm (diameter) x 2mm (height) magnets. Recommended, as the nylon rivets aren't quite strong enough.
  • Glue, if the magnets don't fit tightly.

Print settings

The model dimensions are optimized for a 0.4mm nozzle with 0.2mm layer height. For larger nozzles/layer heights, please check carefully if the rivet holes were sliced in a structurally sound way.

No supports are required unless your printer has issues bridging the 6mm diameter holes for the magnets.

Use the 3MF file to load print settings into the Prusa Slicer.

Assembly instructions

  1. Insert magnets into openings. Use glue if needed.
  2. Remove two adjacent nylon rivets from the back of the CORE One. Leave the plugs in.
  3. Place holder over plugs, re-insert rivets through holes in holder.

Model parameters

The Fusion 360 model file is fully parametrized. Some parameters you might want to adjust:

  • TubeDiameter & TubeInsertLength: Dimension of the holder tubes.
  • MagnetDiameter & MagnetHeight: Dimension of magnets.
  • MagnetNum & TubeNum: Number of magnets/tubes.
  • TubeAngle: Angle of the tubes. 0° is perpendicular to the base strip. Steeper tubes reduce spacing between tubes (the filament plugs are already quite tight at 40°).
  • WallThickness: Minimum thickness of holder tube walls, magnet strip. Increase to make it more robust, or decrease to save space.
  • PinInterfaceHeight: Thickness of base over/around rivet hole. This is the distance the rivet can be inserted less than without the holder (check for overhangs if you adjust this).

The dimensions and distance between the rivet holes are chosen such that it fits the holes of the CORE One with the stock rivets/plugs.

There are some parameters containing formulas. Their purpose is to compute the required spacing before the first holder (from the top) such that the rivet can be inserted. If you need more clearance for the rivets, increase PinLength instead of adjusting the general formula.

Tagi