Super Drum 45 | Talon comaptible 45 round nerf half-dart drum

NOT TO BE SOLD BY FRONTLINE FOAM, BLASTERGUYS OR POTATOFEEDERNERF.

The middle ground between the Super Drum 70 and the Super Drum 34.
 

This magazine takes the same amount of hardware as the Super Drum 34.
 
If you want to sell the Drum or hardware kits to it, please contact me first.

licensed sellers are:

OUTOFDARTS: https://outofdarts.com/products/kptn-a-super-drum-magazine-hardware-kit
Based in the US

Blaster-Time/Foam Focus: https://www.blaster-time.eu/shop/kptn-a-super-drum-magazine-hardware-kit/
Based in the Netherlands

Containment Crew: https://www.containmentcrew.com/product-category/brand/kptnautismus/
Based in the US

BOM:

-3-6x drum springs
-11x m3x10 button/socket head screws
-9x M3x4x5mm brass inserts
-2x 6804-ZZ or 2RS bearings
-ballpoint pen spring (~4,5mm OD, ~25mm length)

-one extra screw and heatset insert required for the molle clip version

-silicone spray lube

Supports are needed only for your neck of choice, the knob and the fan. every part is preoriented.

DISCLAIMER: Some slicers will auto orient the neck so it stands up. we have found it to be more reliable with the “kptnautismus” inscription facing downwards.

you choose the neck based on how far your magazine is sticking out, you measure it by sticking a talon mag into your blaster, marking where the blaster stops and measure the length of the inserted part of the magazine (minus the feed lips). now choose the closest size that is larger than your measurement. 

you'll need extra dummies too.

the 55mm neck takes 3 dummies.
the 90mm neck takes 4 dummies.
the 130mm neck takes 5 dummies.
the 165mm neck takes 6 dummies.
the 200mm neck takes 7 dummies.

Compatibility is exactly the same, although it could perform even better thanks to the smaller inertia of the fan.

Credit goes to many of the members of the BCFF Discord for helping me test it during beta.