1 / 4
Fiamma Carry Bike Tray — zdjęcie 1
1 / 4

Fiamma Carry Bike Tray

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A fixed tray fitting a Fiamma carry bike for PSA (Peugeot Traveller, Toyota Proace,....)

Ocena
0 / 5
Polubienia
2
Pobrania
12
Wydruki
0
Wyświetlenia
205
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a fixed tray designed to fit a Fiamma bike rack for PSA vehicles like the Peugeot Traveller and Toyota Proace.

I created this tray to hold my jerry can and cooking gear, allowing me to use them even when the tailgate is closed with a bike mounted. When the rack is up you maintain a clear view through the rear window while driving.

The sides of the tray are secured by screwing or bolting through the rack's tubes. Slats are then positioned and drilled with a 5mm drill bit. A long drill bit works best, or you can drill two holes at a time, insert the threaded rods, and then drill the next two. The slats are then fixed in place with M5 threaded rods. The middle section is installed in the same way but remains a "floating" piece.
 

For my installation, the simplest method was to remove the first bike rack to easily screw the threaded rods through.

Slats are 11mm thick but you can rework it on https://www.tinkercad.com/things/jWuEovUUeXE-fiamma-bike-rack-tray

Tagi