1 / 10
motherboard cover for Kobra 3 — zdjęcie 1
1 / 10

motherboard cover for Kobra 3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

motherboard cover for Kobra 3

Ocena
0 / 5
Polubienia
4
Pobrania
25
Wydruki
0
Wyświetlenia
154
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

ENGLISH
I created a motherboard cover for Kobra 3 allowing to put a 92*15mmmm fan, thus allowing more silence
I created a version with grid and without grid (the one I printed)

You will need to: 
-1 fan 92*15mm with fixing screw, I used this one: https://www.amazon.fr/dp/B09WYRWBS4
-1 converter 24V to 12V (potentiometer to be set), I used this one: https://www.amazon.fr/dp/B0FDVK6L3J
-2 screws M3*5mm to fix the converter
-1 dust filter (part that I already had)

Print in PETG


FRANCAIS
J'ai créé un couvercle de carte mère de Kobra 3 permettant de mettre un ventilateur de 92*15mmmm, permettant ainsi d'avoir plus de silence
J'ai créé une version avec grille et sans grille (celui que j'ai imprimé)

Vous aurez besoin de : 
-1 ventilateur 92*15mm avec vis de fixation, j'ai utilisé celui ci : https://www.amazon.fr/dp/B09WYRWBS4
-1 convertisseur 24V vers 12V (potentiomètre à régler), j'ai utilisé celui ci : https://www.amazon.fr/dp/B0FDVK6L3J
-2 vis M3*5mm pour fixer le convertisseur
-1 filtre poussière (pièce que j'avais déjà)

Imprimé en PETG

Tagi