Cable markers for Lego motors and sensors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cable markers for Lego cables: PF, PU and Mindstorms
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Having problems identifing the correct cable in your Lego model after changing out your controller or batteries, just like me?
What an age we live in, where years old problems can be solved in house with a bit of plastic and heat.
For years I have been struggeling with identifing the correct cables in my multi-controller MOC's. No more! just slide a cable marker over the cables and plug and unpug them until there is no copper left.
The markers can be printed multi-color with text, or you can print a single color marker and just use a sharpie.
There are 3 different sizes for Mindstorms, Power functions and Powered up.
Mindstorms markers can be used for EV3 and NXT cables
PF cables can be used for the Power functions system
PU cables can be used for all Powered up cables, including Boost, Spike prime, Spike essential, We-do 2.0, Technic and System hubs.
Best use PETG and print as oriented in the STL file. No supports needed.
Split the STL models in parts for multi-color prints.