Leifheit Pegasus drying rack universal clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip for holding the folding racks closed on Leifheit Pegasus drying racks.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Lots of people have been posting clips for holding drying racks closed recently, but none of them fit my Leifheit drying rack. Then someone posted a version for a Leifheit drying rack, but it only fit that specific size/model and not mine. So I decided to try and make my own and make it as universal as possible.
The clip attaches on the 15mm side tube. Swing it up and simply hook one of the thinner crossbars on the folding rack with either of the two smaller hooks on the side. One clip should be enough to keep each folding rack closed(2 total), but for maximum effect you can put a clip on either side(4 total).
Printing:
I recommend PETG, but PLA should be fine too. You will probably need to use a brim, especially in PETG. Use 4+ perimeters so it is all perimeter loops. No support needed.