M-LOK Leroy Merlin Flashlight mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for cheap Leroy Merlin flashlight for M-LOK. You also need 2 m5x10mm, 2 nuts.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is simple but very strong mount for cheap 45 lumen Leroy Merlin no name flashlight.
Check if you have 6mm of space from inside wall of handguard to barrel
For assembly you need 2 m5x10mm and nuts, be aware that m5x16 will be too long in most cases.
To mount flashlight simply push it from top, but make that flashlight dont face backwards (check lines inside mount). If you install it wrong way it will be really really hard to dismount.
Assembly guide:
Put nuts inside of second part and put this part inside of your handguard, then put mount on top of it and screw in bolts. Double check where mount is facing
To dismount flashlight you must push on in from front, it will move slightly backward. Then unscrew battery compartment cap, remove batteries then push it forward. Now put your finger inside of flashlight and pull on it really hard.
Print with 0.2 layer height, 15% infill for mount. 100% infill for second part and dont forget about supports