G36 Leroy Merlin Flashlight mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
G36 mount for cheap Leroy Merlin flashlight. You also need 2 m5x10mm
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is simple but very strong mount for cheap 45 lumen Leroy Merlin no name flashlight.
For assembly you need 2 m5x10mm and nuts, be aware that m5x16 will be too long.
To mount flashlight simply push it from top, but make that flashlight dont face backwards (check lines inside mount). If you install it wrong way it will be really really hard to dismount.
Assembly guide:
Put it on top of stock holes on handguard and screw in two bolts.
To dismount flashlight you must push on in from front, it will move slightly backward. Then unscrew battery compartment cap, remove batteries then push it forward. Now put your finger inside of flashlight and pull on it really hard.
Print with 0.2 layer height, 15% infill and dont forget about supports