Picatinny Leroy Merlin Flashlight mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Picatinny mount for cheap Leroy Merlin flashlight. You also need 2 m4x40mm, 2 nuts.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is simple but very strong mount for cheap 45 lumen Leroy Merlin no name flashlight.
Check if you have 6mm of space from inside wall of handguard to barrel
For assembly you need 2 m4x40mm and nuts, be aware it is designed to take bolts with round top.
To mount flashlight simply push it from top, but make that flashlight dont face backwards (check lines inside mount). If you install it wrong way it will be really really hard to dismount.
Assembly guide:
Insert mount inside the rail, then put left and right parts on their sides. Screw in bolts.
To dismount flashlight you must push on in from front, it will move slightly backward. Then unscrew battery compartment cap, remove batteries then push it forward. Now put your finger inside of flashlight and pull on it really hard.
Print with 0.2 layer height, 15% infill for mount. 100% infill for side parts and dont forget about supports