Starkiller's Lightsabers from The Force Unleashed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my attempt at Starkiller's Lightsabers from The Force Unleashed game. You just need to print one of each part,…
- Ocena
- 0 / 5
- Polubienia
- 74
- Pobrania
- 212
- Wydruki
- 3
- Wyświetlenia
- 1516
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution
This is my attempt at Starkiller's Lightsabers from The Force Unleashed game. You just need to print one of each part, everything should just slide into each other, but you may need to sand it and glue some parts. The Kyber crystal should be printed in clear filament(preferably translucent red), so it has a good crystal /rock look and it does need to get glued in place because the hole is not tight enough to hold the crystal in place. Here's my assemble and paint video for this saber, https://youtu.be/ZseSui-s8O4
If you guys liked this file, be sure to post a make and check out my other files.
Print Settings
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: PolyMaker PLA
Category: Costume