Neptune 4 Max Bondtech LGX Lite Pro Extruder Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Bondtech LGX Lite Pro does not fit inside the SilencedFrost shroud. This shroud is for Beacon3D/Cartographer + LGX
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 527
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
The purpose of this shroud is to enable use of the Bondtech LGX Lite Pro extruder with the Cartographer/Beacon3D bed scanner. There is no reason this shroud won't work with the stock Neptune 4 extruder, but there will be a lot of extra headroom.
This model is highly inspired by the SilenceFrost 5015 extruder shroud. However, I designed this model from the ground up using that design and the OEM designs as inspiration.
Beacon/Cartographer configuration:
- x offset: 0
- y offset: 22
Parts List for Assembly:
- 2x M3x3 heated insert (LED mount)
- 4x M3x5 heated insert (side fan mounts)
- 2x M3x5 heated insert (beacon/carto mount)
- 2x M3x8 heated insert (rear fan mount)
- 6x M3x20 screws (mounting fans)
- 2x M3x6 screws (LED mount - included from OEM Shroud)
- 4x M2x6 screws (extruder mount - included from OEM shroud)
- 3x 5015 24V fans (I used Sunon MF50151V2-1B00U-A99)
