PicoPresso/AeroPress Stand/Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple, support-free, PicoPresso and AeroPress support with some tool holders for the PicoPresso accessories.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 251
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This moddel is generally bigger/sturdier than other stands for the PicoPresso. I needed the extra size to allow me to use the Timemore blackmirror scale underneath and to be also able to use the AeroPress (not only with small espresso cups but also with some bigger mugs (I have some mugs that are tall but thin, so the AeroPress doesn't fit into them).
I've used Green PLA for the build and so far it hasn't warped with the heat. I've printed the “picopressoStand.stl” that has thicker walls and it's 160mm tall (6.3 inches) with 35% adaptive-cubic infill and 4 wall-loops and I found that it was totally overbuilt and that's why I've created the second model that is a little slimmer and less tall but haven't tested it.
Here are the links for the OnShape projects:
- “picopressoStand”
- This is the one that you will see in the photos
- “PicoPressoStandV2_not_tested”
- This one is 150mm tall (instead of 160mm) and has thinner walls.
- This one is 150mm tall (instead of 160mm) and has thinner walls.
Note: To print without supports, you will need to orient the stand where it's back is on the build plate. If you use OrcaSlicer or BambuStudio, the “Auto Orient” option will be enough.
