Egg holder (10x2) - Fridge egg tray replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Egg holder replacement tray for the fridge rack.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Egg holder replacement tray for the fridge rack. My fridge has 2 shelves that hold 10 eggs each. This model replaces the stock tray with a stackable version that can hold 20 eggs on each shelf.
The 2 trays can be used independently. The bottom (shorter) tray is the base and the taller one slots in the holes of the base to stay securely in place when the fridge door is opened or closed. There are holes in the top tray too because I wanted to make that stackable too in case you want to print more of the top trays (But I haven't tested it yet).
High level dimensions:
Egg holes: 40mm diameter (this is meant for medium to large eggs that are usually 700g/12 eggs
Length: 240mm
Width: 95mm
Height: approximately 90mm
This is one of my first complex designs I did in Fusion so there's a lot of room for improvement. If you happen to print it please let me know how you go and what improvements I could have made.