1 / 4
profitec GO - water tank lid with doors
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alternative water tank cover for the Profitec Go coffee machine with a door.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
- no need to take off lid for water filling
- no rattling like the original metal lid
printing:
- due to not so high temperatures in that coffe machine section, PLA is sufficient (PETG better)
- don't need to add supports for door rails (but for safety and easy support remove, you can add “Support on build plate onlySupport on build plate only”)
- for the handle, I used M2x6 screws - please do not use screws longer the 6mmno
