Split flap display module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A split flap display using a Wemos D1 R1 and a ULN2003 driver board with the 28byj-48 stepper motors.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 1606
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A split flap display using a Wemos D1 R1 and a ULN2003 driver board with the 28byj-48 stepper motors. The original design was from Jonas Bonjeanand I've reworked the files to create this one. The main changes were as follows. Additions to the motor mount to be able to fit the electronics on board , changed the drum internals to fit the shaft along with the placement of a 2mm bolt which secures the flaps onto the drum without having to glue the end cap in place. I also mirrored and changed the drum end support to reflect the main drum and added a faux fuel tank to cover the NC end stop.Full build details and instructional along with the code are on Instructables. See the remix link for the original files.
https://www.instructables.com/id/Split-Flap-Display-Antique-Remix/
Print instructions
Unassociated tags: split flap, split flap display
Category: Electronics Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: Yes
Resolution: .2 quality
Infill: 15%
Filament: Sunlu PLA+ white