1 / 4
Speaker grill Carrozzeria TS-F1040-2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a speaker grill that can be attached to the Carrozzeria TS-F1040-2 with a magnet.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Requires four magnets with a diameter of 6mm and a height of 3mm

For 3mf, load it as a multi-part file. For stl, drag both files together into Slicer and load them as multi-part files.

Then set the middle part as a modifier and set the following.
Perimeters: 0
Bottom solid layers: 0
Top solid layers: 0
Fill pattern: honeycomb
Fill density: 20~30%
*The top photo has an infill of 20%, so if you want more detail, set it to about 30%.