Swing Vision Swing Stick Rear Knob Adaptor/Stabiliser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add this adaptor to the rear knob on your Swing Stick if the tennis court you go to has square fences.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 292
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
The Swing Stick made by Swing Vision is great for recording your 3.0 tennis games but, it is really made for US tennis courts… Here in Hong Kong where I'm living currently, the fences are so tall and I rarely get to use the “fork” to hang the stick up the fence. I found myself using the “Knob” part of the stick a lot. However, a lot of courts here have square grill fences instead of diamond mesh, the round knob just would not sit flat against square fences. When wind blows or a ball bouncing off the fence the stick would wobble left and right and ruin my recording. So I created this adaptor with a flat base that simply clips on to the knob! It will also make the stick more stable on diamond fences!
I printed with PETG 10% Infill, 3 Wall Loops, 0.2mm thickness and it clipped on the stick perfectly and seemed to hold up fine.