Dual-Lumen Catheter (education)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D model of a dual-lumen (PowerPICC™ FT style) Catheter for use in medical education and play.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution
These models are based off of a Dual-lumen PowerPICC™ FT Catheter at Ann & Robert H Lurie Children's Hospital of Chicago. It's intended use is for medical education and fostering medical play opportunities. The model consists of three parts; a connector and cap that needs to be printed twice and the Y split. Both should fit 1/8" OD silicone tubing but may need post processing to properly fit. Models are designed to scale but can be adjusted in the slicer to fit teddy bears, education dolls, or other resources as needed.
Connecter/cap can be printed vertically with no supports, but will be stronger if printed at a 45 degree angle.
THIS MODEL IS ONLY APPROXIMATELY REPRESENTATIVE OF ACTUAL MEDICAL HARDWARE AND SHOULD NOT BE USED FOR MEDICAL REFERENCE