Halo-gravity Traction (HGT) Device (EDUCATION)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3d model of a Halo-gravity Traction (HGT) Device for use in medical education and play
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 297
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution
This is a model are based off of a Halo-gravity traction (HGT) device created at Ann & Robert H Lurie Children's Hospital of Chicago. It's intended use is for medical education and fostering medical play opportunities. The model is scaled to fit dolls/stuffed animals and will likely need to be tweaked to fit your desired figure. The two arms and bottom bracket should be printed twice and there are spots for 9 pins to be placed. The pins do not screw in, so would need to be glued but are still useful to print to show how they fit into the halo.
It is recommended to set wall/infill so that the arms are solid plastic.
THIS MODEL IS ONLY APPROXIMATELY REPRESENTATIVE OF ACTUAL MEDICAL HARDWARE AND SHOULD NOT BE USED FOR MEDICAL REFERENCE